The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes, Will fit directly to most routers.
Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.
The key to the development of Trend over the past 50 years has been its approach to introducing innovative products worldwide. From introducing the first plunge router into the UK in the 1950´s to supplying developing countries with the technology to create prosperity in 2001, they have truly pushed the boundaries of routing technology.
Their approach to technology is not limited to product development, their service also extends beyond the limits of customer expectation. They have built a
More Trend products
Look for similar items by categoryPower-Tools-AccessoriesRouter-Bits-Accessories
Email or Phone
- Email: email@example.com
- Phone: 01-4877387
- Unit 14, Churchtown Business Park,
- Dublin 14